Early SS Bally/Stern LED Adapters

  • $45.00


Scroll down for our installation video of the Bally/Stern flicker eliminator board.

These adapters will allow you to use LED's in your classic Bally / Stern's with -17, -35, -43, -52, M-100 and M-200 CPU board sets. No soldering, no crimping, no tools required. It converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market.

It's important to select the game you are buying these for with the radio buttons above, as different games use different boards. Additional charges are listed when applicable.

ALTEK main lamp driver boards do not require an LED adapter, only factory original main lamp drivers require LED adapters.

The "-43 Boardset" selection above refers to:
  • Black Pyramid
  • Centaur
  • Centaur II
  • Future Spa
  • Kiss

The "-52 Boardset" selection above refers to:
  • Eight Ball Deluxe (All versions)
  • Elektra
  • Embryon
  • Fathom
  • Fireball II
  • Flash Gordon
  • Medusa
  • Space Invaders
  • Mr. and Mrs PacMan
  • Speakeasy
  • Vector
  • Xenon

The -17, -35, M-100 and M-200 selection above refers to any classic Bally / Stern's with -17, -35, M-100 and M-200 CPU board sets not otherwise mentioned in any of the above lists. Including:

Bally solid states:
  • Black Jack
  • BMX
  • Cybernaut
  • Dolly Parton
  • Eight Ball
  • Evel Knievel
  • Fireball Classic
  • Freedom
  • Frontier
  • Ground Shaker
  • Harlem Globetrotters
  • Hot Doggin
  • Kings of Steel
  • Lost World
  • Mata Hari
  • Mystic
  • Night Rider
  • Paragon
  • Playboy
  • Power Play
  • Rolling Stones
  • Silverball Mania
  • Six Million Dollar Man
  • Skateball
  • Spy Hunter
  • Star Trek
  • Strikes and Spares
  • Supersonic
  • Viking
  • Voltan
  • X's and O's

Stern solid states:
  • Ali
  • Big Game
  • Catacomb
  • Cheetah
  • Cosmic Princess
  • Dracula
  • Dragonfist
  • Flight 2000
  • Freefall
  • Galaxy
  • Hot Hand
  • Iron Maiden
  • Lectronamo
  • Lightning
  • Magic
  • Memory Lane
  • Meteor
  • Nine Ball
  • Nugent
  • Orbitor 1
  • Pinball
  • Quicksilver
  • Seawitch
  • Split Second
  • Star Gazer
  • Stars
  • Stingray
  • Trident
  • Viper
  • Wild Fyre


Unfortunately, the adapter boards are not compatible with Baby Pacman, Gold Ball, Grand Slam, or Granny and the Gators.

Troubleshooting Addendum:

If the adapters either don't work at all, or actually make the strobing problems even worse, it is likely one of the following issues:

1: Check continuity on the wiring harness. Occasionally there have been issues with wire processing equipment, resulting in bad crimps, and potentially a bad spool of wire too.

2: Check the voltage on the spot you're attaching the alligator clip. It should be around 5.5v to 6v, if it's 3v-4v, it's way too low and the adapters won't work there. Check other lamp locations either in the backbox or even under the playfield.